The impeller generally has three vanes or five vanes and wide application range.It is made of wear-resistant high chromium alloy cast iron(hardness≥58HRC,impact toughness≥9J/cm2).The impeller is fixed on the pump shaft with double thread,and the thread tolerances are inspected according to the pitch diameter of thread.Disassembly rings are installed at the rear of the shaft sleeve to make maintenance easy.
High flow capacity 450 N series wear-resistant dredging pump
Product Description
Product Application
N series wear-resistant Dredge Pump,a new type of Slurry Pump,is designed and developed base on the advanced technology of ZJ series slurry pump to solve the situation where China's rivers and lakes are badly in need of dredging.N series Dredge pump is single-stage,single suction,horizontal and Centrifugal Pump.It has many features:light weight,high wear resistant,excellent dredging performance,reasonable structure and cost-effective.So this pump can meet the requirements of Dredgers completely.
N series Wear-resistant Dredging Pump Performance Data Sheet |
Model | Capacity (m3/h) | Head (m) | Speed (r/min) | Efficiency (%) | NPSHr (m) | Inlet diameter (mm) | Outlet diameter (mm) | Particle max. Size handled occasionally(mm) |
100ND | 100-250 | 20-50 | 800-980 | 65-70 | <3.0 | 150 | 100 | 50 |
150ND | 240-650 | 24-61 | 980-1480 | 62.5-71.7 | <3.5 | 250 | 150 | 70 |
200ND | 610-1560 | 29-62 | 650-900 | 61-62.4 | <4.5 | 250 | 200 | 143 |
250N | 750-1800 | 30-75 | 500-750 | 65-76 | <4.0 | 350 | 250 | 125 |
250ND | 600-2000 | 21-59 | 490-740 | 68.5-79.8 | <4.0 | 350 | 250 | 146 |
300N | 1600-2200 | 40-65 | 400-550 | 72-78 | <4.5 | 400 | 300 | 135 |
300ND | 1500-3750 | 29-65 | 400-550 | 69-73 | <4.5 | 420 | 300 | 201 |
350ND | 1700-2750 | 24--58 | 400-590 | 77-81 | <4.0 | 450 | 350 | 122 |
450N | 3150-6500 | 40-65 | 350-500 | 74-80 | <4.5 | 600 | 450 | 220 |
450ND | 3100-5200 | 30-66 | 350-490 | 68.5-75.2 | <4.5 | 600 | 450 | 115 |
500N | 5900-9100 | 40-75 | 350-450 | 74-80 | <4.8 | 650 | 500 | 245 |
500ND | 4000-7000 | 20-41 | 220-325 | 75-82 | <4.5 | 650 | 500 | 203 |
600N | 6500-12000 | 45-70 | 300-400 | 78-84 | <4.8 | 700 | 600 | 240 |
600ND | 4800-8900 | 20-42 | 350-420 | 82-85 | <4.6 | 700 | 600 | 240 |
650ND | 8500-14300 | 23-65 | 300-450 | 82.3-85 | <4.6 | 800 | 650 | 256 |
700N | 10500-16400 | 40-75 | 300-380 | 80-85 | <6.0 | 800 | 700 | 260 |
700ND | 8000-13000 | 20-45 | 240-280 | 81-84 | <5.3 | 800 | 700 | 260 |
800N | 14500-21800 | 55-80 | 300-360 | 81-85 | <6.0 | 900 | 800 | 275 |
800ND | 9700-15400 | 20-40 | 200-280 | 82-84 | <5.3 | 900 | 800 | 275 |
900N | 21000-31000 | 45-70 | 200-280 | 80-85 | <5.8 | 1000 | 900 | 300 |
900ND | 12000-21500 | 20-40 | 160-210 | 82-88 | <6.0 | 1100 | 1000 | 300 |
1000N | 24350-39000 | 26-78 | 210-290 | 82-85 | <6.0 | 1100 | 1000 | 320 |
Main Features
1.Single stage, single case, metal liner, horizontal anti-abrasion centrifugal pump.
2.Advanced hydraulic model, CAD-aided design, high efficiency and remarkable energy-saving effect.
3.Strong flow capacity. The pump can pump gravel, high plastic clay lumps and so on.
4.Strong matching capacity. The diesel Engine and the motor are both available.
5.Stable running, small vibration and low noise.
6.The whole machine has high reliability and remarkable economic benefits.
The structural drawing of N series ,wear-resistant dredging pump |
1. Pump casing | 2. Front Cover Plate | 3. Front Liner Plate | 4. Impeller |
5. Inlet Busgh | 6. Rear Liner Plate | 7. Rear Cover Plate | 8. Seal Assembly |
9. Disassembly Ring | 10. Support | 11. Turning Disk | 12. Shaft |
1. Front Casing | 2. Pump Casing | 3. Shoulder Ring | 4. Front Cover Plate | 5. Front Liner Plate |
6. Impeller | 7. Inlet Shaft Sleeve | 8. Rear Liner Plate | 9. Rear Cover Plate | 10.Seal Assembly |
11. Disassembly Ring | 12. Support | 13.Turning Disk | 14. Shaft | 15. Rear Casing |
Impeller
Volute casing
The volute casing is made of wear-resistant and compression-resistant alloy(hardness≥56HRC,impact toughness≥8J/cm2).Advanced smelting technology combined with casting process and heat treatment process guarantees smooth casting surfaces and reliable internal qualiyt.
The bulge test will be carried out after molding,and the test pressure is 2 times of the discharge pressure of the pump.If there no leakage after 20 minutes,strength and tightness,strength and tightness pressure test reports can be issued.
Liner plate
The liner plates are made of wear-resistant high chromium alloy cast iron(hardness≥56HRC,impact toughness≥8J/cm2).
E-Touch regards customer as the foundation,the customers' satisfaction is our permanent persuit.E-Touch has established perfected strict quality assurance system and service assurance system.E-Touch strictly inspects each product before they leave the factory strictly dwording to the international inspection standard.E-Touch performs each contract strictly,delivers its products on time and managers to supply the spare parts in time.E-Touch sincerely supplies customers with first class products,first quality and first service.
Add:Weifang city,Shandong province,China
Mob:+86-18663638531
Tel:+83-536-2294977
Email: dellazheng@e-touch.cc
Product Categories : Dredger Parts > Dredge pump
Premium Related Products