Machinery Gold Grinding Machine Wet Pan Mill In Gold Processing Line For Gold Extraction And Selection
Product Description
Product Description
The wet pan mill is a new mill, small investment, high yield, the production cost is low, good benefits.
The wet pan mill is named by the diameter of roller. Φ1300,Φ 1350,Φ 1400,Φ 1500,Φ 1600 is suitable for selection of iron
ore,molybdenum ore ,lead ore ,zinc ore, antimony ore and so on. Φ 850, Φ 900, Φ 1000,Φ 1100,Φ 1200 is suitable for selection of gold ore.
ore,molybdenum ore ,lead ore ,zinc ore, antimony ore and so on. Φ 850, Φ 900, Φ 1000,Φ 1100,Φ 1200 is suitable for selection of gold ore.
As their small investment, high yield, the production cost is low, good benefits, praised by users, domestic alternative to theball mill equipment. Grind gold machine easy installation and maintenance, small investment, high yield, quick, low-cost production, is the ideal equipment for mine SMEs beneficiation.
◆ wet pan mill Application area
Mainly used with gold, silver, lead, zinc, iron, molybdenum, copper, antimony mine, mine, all ball mill can be selected grind gold machine can be used. Characteristics: grind gold through the raw material mixing, rolling, crushing,.rolling repeatedly reach moisture equilibrium ratio of uniform, low gas content, improve the forming rate and forming quality, grind the material through the machine molding Products with high density, good strength, no porosity ratio weight. Energy efficient, high volume of output, the product is used for iron ore process tailings recovery, not to slag the loss of effective resources can be fully utilized.
◆ Wet Pan Machine Use and Maintenance
1.The normal operation of the mill, before they start feeding. 2.this machine prohibit strip start, the outage at boot time, you must first clean up the residual ore in the middle of the milled slot and then start. 3.should be uniform feeding not erratic, it is best to use the feeder. 4.bearing frequent butter, gear box or car rear axle with frequent checks whether the loss of gear oil. 5.regular checks of the various parts of the screw is loose. 6.Found bearing damage must be promptly replaced, shaft eccentric avoid damage to other parts. 7.mill runtime to pay attention to that the reducer or bearing part of the presence or absence of abnormal sound, whether the temperature is too high, the motor current is too large irregularities; should be shut down immediately if the.
Technical data
Model | Specifications | Input size | Rotate speed | Capacity | Power | Machine weight |
1600A | 1600×400/2100×500*180±20mm | <30mm | 18-20 | 5-6T/H | 37KW | 16.3 |
1500A | 1500×400/2100×500*180±20mm | <30mm | 18-22 | 4-5T/H | 30KW | 13.5 |
1500B | 1500×350/2050×450*150±20mm | <30mm | 18-22 | 4-5T/H | 22KW | 12.3 |
1500C | 1500×300/2050×400*150±20mm | <30mm | 18-22 | 4-4.5T/H | 22KW | 11.3 |
1400B | 1400×250/2050×350*150±20mm | <30mm | 18-22 | 3-4T/H | 15kw | 8.5 |
1400A | 1400×300/2050×400×150±20mm | <30mm | 18-21 | 3-4T/H | 18.5kw | 9.6 |
1300B | 1300×250/2000×350×150±20mm | <30mm | 18-22 | 2.5-3.5T/H | 11kw | 7.5 |
900A | 900×170/1700×220×45±10mm | <30mm | 11-13 | 0.1-0.5T/H | 3kw | 2.9 |
900B | 900×140/1700×170×45±10mm | <30mm | 11-13 | 0.1-0.5T/H | 3kw | 2.6 |
1200A | 1200×200/1800×250×100±10mm | <30mm | 11-19 | 2-3T/H | 7.5kw | 5.5 |
1200B | 1200×180/1800×250×100±10mm | <30mm | 11-19 | 2-3T/H | 5.5kw | 5.5 |
1100A | 1100×200/1800×250×100±10mm | <30mm | 11-19 | 1-2T/H | 7.5kw | 5 |
1100B | 1100×180/1800×250×80±10mm | <30mm | 11-19 | 1-2T/H | 5.5kw | 5 |
1000 | 1000×200/1800×250×80±10mm | <30mm | 11-19 | 0.5-1T/H | 5.5kw | 4.5 |
Successful cases
◆ gold wet pan will for gold ore in Tanzania
Capacity:2-3TPH
Mineral:rock gold
Model:JXSC 1600
Feeding size:10mm
Output size:0.02mm
Power:37KW
Time :2017 year
machines:shaking table,wet pan mill ,pumps ,belt conveyor ,etc
Capacity:2-3TPH
Mineral:rock gold
Model:JXSC 1600
Feeding size:10mm
Output size:0.02mm
Power:37KW
Time :2017 year
machines:shaking table,wet pan mill ,pumps ,belt conveyor ,etc
◆ Rock gold wet pan mill process in Sudan
Capacity:5TPH
Mineral:rock gold
Model:JXSC 1600
Feeding size:20mm
Output size:0.1mm
Power:37KW
Time :2018year
machines:feeder,Magnetic Separator,shaking table,wet pan mill ,pumps ,belt conveyor ,etc
Capacity:5TPH
Mineral:rock gold
Model:JXSC 1600
Feeding size:20mm
Output size:0.1mm
Power:37KW
Time :2018year
machines:feeder,Magnetic Separator,shaking table,wet pan mill ,pumps ,belt conveyor ,etc
We have provided the Wet pan mill for many customers in Sudan,Mali, Mozambique, Nigeria, Suriname, Ghana, South Africa,Uganda,Zambia, Tanzania, Angola, Canada, Austrialia, Chile, Peru,ect. For Alluvail gold Washing plant, coltan ore mining plant,diamond washing plant, Iron ore washing plant,ect.
Packing & Delivery
◆ Ways of packing
1.Small parts packed in the wooden cases
2.Big parts packed by plastic membrane
3.The whole big machine is loaded in the container
3.The whole big machine is loaded in the container
◆ Shiping by sea/air freight
or any way the customer requires
Company Introduction
◆ Jiangxi walker Machinery Co.,Ltd
Jiangxi walker Machinery Co.,Ltd, are a professional manufacturer of complete set mining equipments, a sub-company of JXSC mine machinery factory in Jiangxi province.professional at providing complete set processing equipments for Gold ore /Tin ore /Tungsten ore /Iron ore / Diamond/ Coltan ore / Silica sand / Zircon sand/ Black sand/Chrome ore, ect. As well as complete set small lab mining machines.
1.Inquiry and consulting support.
2.Ore sample testing support.
3.View our Factory.
4.Design Flowchart.
2.Ore sample testing support.
3.View our Factory.
4.Design Flowchart.
1.Training how to instal the machine, training how to use the machine.
2. 1 year warranty .
3.Engineers available to service machinery overseas.
2. 1 year warranty .
3.Engineers available to service machinery overseas.
FAQ
1.How is the quality of your products?(mining equipment/machine)
Answer: Our products are manufactured strictly according to national and international standard, and we will do a test on every machine before delivery.
2.Guaranteed?
Answer: All of our products are guaranteed for one year. If products quality is not consistent with the description or promise we made before you place order, we promise 100% refund.
3.How about price?
Answer: For the complete same machine, we can promise our quality is the best when the price same as other competitors, and our price can be lowest when the quality at standard level.
4.Service and Payment Terms?
Answer: We can accept T/T and L/C; 30% deposit, 70% balance before factory delivery, which is international trade practice; Finished product pictures will be provided to customers before delivery.
If you are interested in our products, please don't hesitate to contact us. Could you tell me the following questions, so that I can give you a complete solution, including best Exw-works Price Quotation!
1. Which machine do you need? like gold washing machine, Spiral Chute, vibrating screen, Jig separator, Shaking table, etc.
2. What is your raw ore that you plan to process? like gold ore, diamond ore, tantalite or silica sand, etc.
3. What is the capacity you need? Like 10 tones per hour.
4. What is the feeding size to the machine? and what is the discharging-material size that you require?
Sincerely welcome to send your inquiry,you can get best quotation and professional service.
Answer: Our products are manufactured strictly according to national and international standard, and we will do a test on every machine before delivery.
2.Guaranteed?
Answer: All of our products are guaranteed for one year. If products quality is not consistent with the description or promise we made before you place order, we promise 100% refund.
3.How about price?
Answer: For the complete same machine, we can promise our quality is the best when the price same as other competitors, and our price can be lowest when the quality at standard level.
4.Service and Payment Terms?
Answer: We can accept T/T and L/C; 30% deposit, 70% balance before factory delivery, which is international trade practice; Finished product pictures will be provided to customers before delivery.
If you are interested in our products, please don't hesitate to contact us. Could you tell me the following questions, so that I can give you a complete solution, including best Exw-works Price Quotation!
1. Which machine do you need? like gold washing machine, Spiral Chute, vibrating screen, Jig separator, Shaking table, etc.
2. What is your raw ore that you plan to process? like gold ore, diamond ore, tantalite or silica sand, etc.
3. What is the capacity you need? Like 10 tones per hour.
4. What is the feeding size to the machine? and what is the discharging-material size that you require?
Sincerely welcome to send your inquiry,you can get best quotation and professional service.
Product Categories : Mineral processing products > wet pan mill
Premium Related Products
Other Products
Hot Products
8/6 Ee-Ah Horizontal Centrifugal Mining Slurry Pump2 Inch Mining Froth Pumps (2 QV-AF)Wq Series Submersible Centrifugal Sewage Water PumpFarming Irigation and Industry Deutz Diesel Water PumpShijiazhuang Pump Factory OEM Heavy Duty Copper Mining Processing 10X8 Slurry PumpL Series Wear Resisting Low Abrasive Slurry PumpZjw Series Strong Abrasion Resistant Feed Slurry PumpHigh Chrome Alloy Cast Iron Mining Solid Pump (HH)Spr Series Vertical Centrifugal Slurry Sump PumpZjq 300-30-55 Heavy Duty Submersible Dredging Sand PumpWsg Heavy Duty Sand Dredging Diesel PumpPaper Pulp and Flotation Using Vertical Froth Pumps (AF)Ce Certificated Single Stage Horizontal Centrifugal Dredging Slurry Pump14/12ff-Lr Large Centrifugal Horizontal Ash Slurry PumpSuction Dredge Sand Pump (150ZJS)12/10 St-Ah Heavy Duty Horizontal Mining Slurry Pump