Cross Belt Magnetic Separator

Cross Belt Magnetic Separator

Due to the nature of laser spectroscopy (LIBS) online analyzers successfully used in real-time quantitative analysis of various elements of interest, including the light ones. Besides, parameters such as material moisture, ash, calorific value can be detected.
online analyzer is a radiation-free material elemental composition analytics solution for real-time process control optimization in the mining and mineral processing industry.
The technology provides simultaneous quantitative analysis of bulk material flows directly on the conveyor belt or in Pipes. All elements, including the light ones (C, Si, Mg, Al, etc..) can be detected in real-time mode without lab sampling and sample preparation.
Cross belt analyzers are designed to withstand the harsh industrial environment and are used in mining, beneficiation, raw material preparation and product quality control applications by clients in N. America, Europe, and Asia.

Product Features

Strong environmental adaptability: Iron Slurry Analyzer can adapt to the harsh industrial site environment.

Highly corrosive environment: The probe is made of corrosion-resistant materials and can adapt to most corrosive environments such as strong alkalis.

There are no special requirements for the composition of the materials to be measured: Fluorescence Element Analyzer is not affected by bubbles; Single Channel Analyzer is low affected by large particles; Multi-Channel Element Analyzer is not affected by magnetic interference.

The detection range of particle size is wide: the maximum size range of 60 percentage points can be detected, and the minimum size range of 20 percentage points can be detected.

The size fraction span is large: The particle size analyzer measurement can be achieved in the diameter of the grain between 20μm to 1000μm.

Product Parameter

The maximum detectable flow channel number 1
The number of size fraction that can be detected at the same time in each channel ≤2
The grain diameter range that can be detected (μm) 20 ～ 1000
The nominal detectable particle size interval per size fraction (%)
Size fraction	Interval
μm：-75 ～ -850 mesh：200 ～ 20	20 ～ 80
μm：-45 ～ -75 mesh：325 ～ 200	30 ～ 70
μm：-25 ～ -45 mesh：500 ～ 325	70 ～ 95
Maximum nominal particle size span (percentage point) 30
the absolute error in the 1σ (%) 1 ~ 2
Analog output：4 ~ 20mA
Level of protection：detector：IP65；main control box：IP54
Ambient temperature：0 ~ +50℃
Medium environment：1 ~ 90℃
Medium pressure：86 ~ 106KPa
Power supply：220V AC，50Hz，50W

Product Application

It is mainly used to detect and analyze the particle size of the hard grain in the liquid and solid mixture slurry. PSI can be used in the grinding and dressing fields of black metal industry, basic metal industry, industrial mineral industry, and gold industry.

Contact us if you need more details on On-Belt Online Elemental Analyzer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cross Belt Separator、On-Belt Analyzer System. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Elemental Analyzer